Don’t overload the hoist. Stay within the hoist rated capacity and observe the limits of the machine.

Don't fall for it! Position your MEWP correctly and always stay inside the platform guardrails with both feet on the platform floor.

Are you servicing the MEWP safely when on-site? Servicing MEWPs on-site can create higher risks than workshop servicing.

Use a Spotter. In situations with restricted visibility, use a banksman/spotter to guide you into position.

Be safe in the workshop. Ensure all work on MEWPs is carried out safely.

Keep all occupants safe. Be aware of all platform occupants when moving the MEWP.

Is the Nominated Ground Rescue Person familiarised? Not all MEWPs are the same. Make sure you understand, learn and practice the ground controls and emergency lowering procedure.

Do not use a damaged harness, lanyard or connector. Always conduct a pre-use check before using your personal fall protection equipment (PFPE).

Be street smart! Manage vehicle and pedestrian traffic, create a safe working zone.

Use Spreader Pads! Always check ground loading and use the IPAF spreader pad calculator.

Working at height is a high-risk activity, take care of your people and be responsible for safety with IPAF's help. IPAF has a range of Andy Access posters, in multiple languages, to help your workforce, covering important mobile elevating work platform (MEWP) and mast climbing work platform (MCWP) safety topics. All to help keep operators safe and prevent accidents.

Register pre-owned MEWPs. Make sure you register with the MEWP manufacturer to get safety alerts and product updates.

Do not jump out of the platform. Always enter and exit the platform using three points of contact.

Danger keep well clear. When using pedestrian controls stand clear of the MEWP and return back to the platform when safe.

Caution with guardrails. Be careful not to trap your fingers when lowering or raising guardrails.

Correct MEWP selection. Always use the right MEWP for the job.

Don't overload the Platform. Always respect the load chart and follow the manufacturer’s guidance for its intended use.

Do not interfere with ties. A mast climbing work platform (MCWP) needs all of the ties for stability.

Don't use a MEWP as a crane! Lifting objects can overload or damage the MEWP and cause it to overturn.

Prevent unauthorised use. After use, always leave the MEWP in a safe and secure place and remove the key.

Keep clear of cables. You do not need to touch the power cables to be electrocuted – electricity can jump!

Setting up on a slope? Outriggers and spreader pads must be on level and stable ground.