Are You Responsible For The Pre-delivery Inspection Of MEWPS?

Never Charge Hand Tool Batteries On The Platform!

Take care with lead acid batteries. Always wear the correct ppe and use the right equipment when charging and maintaining batteries.

Do you have a rescue plan? Always plan for a safe rescue.

Damaged Charging Leads & Plugs Can Cause Electrocution!

Always Report Accidents & Near-Misses

Safe Crossing. Self-propelled MEWPs must always be transported on a trailer or vehicle across rail tracks.

Do not exit the platform at height!

Never interfere with safety systems.

Don’t get hit at height! Never elevate the platform if there is a risk of being hit by other equipment.

Retract extension decks before lowering. Check all four corners are clear of obstructions before you lower the platform.

Never elevate the platform occupants from the ground controls. There is an increased risk of crushing/entrapment if you elevate people from the ground control position.

Don’t forget to report all accidents and near misses involving powered access into the IPAF Accident Reporting Portal or report anonymously through IPAF’s ePAL app.

Conduct a pre-use inspection and make sure the MEWP is safe to use before starting work.

Before setting up a MEWP on a road have in place a traffic management plan and an exclusion zone.

Don’t operate a MEWP when there is a risk of lightning. Seek proper shelter and wait until the storm passes.

Don’t Overload the Platform. Overloaded platforms can become unstable, always understand the machine limits before operating. Distribute the load evenly to prevent tip overs.

Position your MEWP correctly and always stay inside the platform guardrails with both feet on the platform floor

Understand the ground conditions before operating

Always be aware and avoid crush hazards when moving the platform.

Prevent objects falling from the platform. Be aware that unsecured tools and materials can fall from platforms.

Stay safe when working around antennas. You are at risk from non-ionising radiation (RF) from transmitting antennas. Always make sure they are isolated and you have a permit to work.