IPAF publishes guidance on avoiding contact with power lines

IPAF Safe Use of MEWPs in the Vicinity of Power Lines guidance COVER

Comprehensive new guidance outlining key principles and ways to reduce risks when using Mobile Elevating Work Platforms (MEWPs) in the vicinity of power lines, with the aim of helping to reduce electrocution and electric shock incidents, has been launched by the International Powered Access Federation (IPAF), as part of its High Voltage! targeted global safety campaign, at the Conexpo event in Las Vegas, US.

The new guidance document, entitled Safe Use of MEWPs in the Vicinity of Power Lines, has been developed by IPAF in collaboration with the IPAF International Safety Committee (ISC) and supporting members and is available to view or download initially inEnglish. After being launched officially at Conexpo, and following industry review and consideration of anyfeedback, the document will be made available in other languages and region-specific versions.

The document can be viewed and downloaded free of charge in digital format and is also available print-ready,allowing organisations to produce co-branded hard copies as required. Brian Parker, IPAF’s Head of Safety & Technical, says: “By analysing data from the past ten years of accident reporting via IPAF’s portal, it’s evident that incidents involving electrocutions and electric shocks have notably increased since 2015. Onestandout statistic is that reported incidents of electrocution are nearly always fatal.

“Working in the vicinity of energised power lines can expose workers to health and safety risks including death by electrocution or electric shock. If a MEWP orits occupants contact energised power lines it can cause instant death, electric shock or other injuries caused directly or indirectly by electricity. Equally serious can be the effect of electricity arcing from the power line to a MEWP and its occupants.

“As with all common causes of accidents involving MEWPs, workplace safety culture, and behaviour can play a big part in reducing the number of incidents. Ignorance or lack of awareness of the main underlying risks can lead to complacency and potential exposure to unsafe situations. It was clear that this is another of those all-too-common types of incidents that our industry should be doing much more to understand and eradicate, which nearly always result in serious, life-changing injury or death. 

“IPAF has prepared a brand new, comprehensive guidance document, which we hope will assist all those planning, operating, and supervising the use MEWPs in the vicinity of power lines in identifying and understanding the risks. The guide outlines measures that can reduce or mitigate these and in turn reduce the occurrence of incidents involving contact with or arcing from power lines.”

IPAF’s Safe Use of MEWPs in the Vicinity of Power Lines guidance aims to:

• Provide information for those who plan and manage MEWP operations.

• Provide information on the main causes of electrocutions with power lines.

• Raise awareness of the hazards and risks of working in close proximity to power lines.

• Provide information on the industry sectors where electrocutions and electric shocks occur.

• Identify risk control measures and a Safe System of Work (SSoW) to implement and reduce the number of incidents occurring.

• Provide general global guidance for those who undertake tasks to prevent incidents from occurring.

Parker adds: “We hope all those who read this document and especially those in person at Conexpo will let us know their thoughts. Like all of IPAF’s industry safety and technical guidance, this is a ‘living document’ and we place a huge emphasis on listening and responding to constructive feedback – so I urge people to view and download the document, read and understand it, and share it with colleagues.”

Included among the key points of safety guidance included in the new document are:

Plan thoroughly – look out and around for power lines in the work area. Conduct a site survey and risk assessment ensuring an SSoW is completed. Correct machine selection is critical. If power lines are in your work area contact the Energy Supply Authority (ESA) before work commences. Ensure operators are briefed prior to work commencing and that they are made aware of any power lines in the vicinity.

Ensure operators are trained – anyone involved in the safe use of MEWPs must be properly trained on the type of MEWP they are using and must receive machine-specific familiarisation. Managers must ensureMEWP operators, supervisors, and spotters are briefed on the SSoW.

Stay outside exclusion zones – an exclusion zone is the prescribed safety envelope around live electric power lines. You must not operate a MEWP where there is potential for any part of it to enter an exclusion zone. Distances for exclusion zones can vary; these must be obtained from the relevant ESA.

Know your rescue plan – if someone has been electrocuted by arcing of electricity or has been in contact with a power line, call the emergency services immediately and call the ESA to have the power turned off and the lines isolated. Observe the Stay, Call, Wait protocol. 

Peter Douglas, CEO & MD of IPAF, comments: “This is a comprehensive new document and I trust the powered access industry will find it useful in planning and conducting work at height in the vicinity of power lines. Our accident data shows there is a particular prevalence of this type of incident in the US, so launching the latest IPAF global safety campaign here at Conexpo is ideal. 

“As with last year’s Don’t Fall For It! IPAF global safety campaign, we really hope High Voltage! can help to shift the dial on the most common types of safety incidents involving powered access. This is a challenge that affects all of us in the industry, and we have a collective responsibility to act.

“I’d like to thank all the members of the IPAF team, the ISC work group, and those members who devoted time and effort to producing this guidance. IPAF would also like to thank all those who continue to report accidents and near-misses via the IPAF portal; analysis of this vital data has been invaluable in shaping the safety guidance and continues to inform all of the work that IPAF and its committees do, not least in producing relevant and effective safety campaigns and comprehensive good practice guidance.”

● See www.ipaf.org/resources to view or download the new IPAF Safe Use of MEWPs in the Vicinity of Power Lines document. For information about High Voltage! as well as Don’t Fall For It! and all of IPAF’s targeted safety campaigns see www.ipaf.org/safe and continue to use www.ipafaccidentreporting.org to report incidents and near misses involving powered access.

Other news you might be interested in

  • The International Powered Access Federation (IPAF) is gearing up for Intermat 2024, taking place between April 24th-27th at the Paris-Nord Villepinte convention centre, France. Situated at stand number F043 in Hall 6, IPAF invites industry professionals, stakeholders, and partners to engage with the team and delve into crucial discussions surrounding safety within the industry.

  • The International Powered Access Federation (IPAF) announces the launch of its Global Safety Campaign for 2024, titled "CRUSHING CAN KILL!" The third Global Safety Campaign released during IPAF Head of Safety and Technical Brian Parker’s tenure aims to raise awareness and reduce entrapment and crushing incidents involving Mobile Elevating Work Platforms (MEWPs), which have resulted in numerous fatalities and injuries over the past decade.

  • The IPAF Summit 2024, hosted at the Scandic Hotel in Copenhagen, Denmark, that was attended by more than 300 industry professionals, began with a heartfelt and thought-provoking speech by newly elected IPAF President, Karel Huijser. The presentations kicked off with an energetic joint effort by Amanda Tan, IPAF Asia Regional Development Manager, and Diego Bustamante, IPAF Latin America Regional Manager/North America Project Coordinator. Amanda and Diego, representing a new generation of leaders and introducing the summit theme of “Empowering the Next Generation”, highlighted the diverse backgrounds and global coordination within the IPAF team, spanning 14 time zones.